YZ-2DTM L/R 3G Transmission Housing Upgrade - Z2-302D3M by Yokomo  [Z2-302D3M]

Yokomo Z2-302D3M 3G Transmission Case L/R for YZ-2DTM
Price:
AUD$12.24
Brand:
Yokomo
Model:
Z2-302D3M
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - Off-Road Drive Train Parts category
Write a review

Left and Right 3G Transmission Housing for YZ-2DTM

This 3-gear transmission housing is built for the 2WD YZ-2DTM platform and holds the 3G gear train in place. It serves as the mounting structure for the chassis driveline components on YZ-2DTM based vehicles.

Use the left/right set to replace worn or damaged housings on compatible B-YZ2DTM family models. The component is aimed at maintenance and repair where correct enclosure fit and alignment influence gear engagement and drivetrain behavior.

Installation advice: ensure bearings are correctly seated, align parts carefully during reassembly, verify gear mesh and eliminate excessive freeplay, and recheck any reused seals or shims. The part is intended to match the original fit rather than to change gear ratios.

Compatibility

  • B-YZ2DTM
  • B-YZ2DTMW
  • B-YZ2DTM2
  • B-YZ2CAL2
  • B-YZ2DTM2S
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does this housing affect gear mesh adjustments?

The housing positions the gear train, so correct seating and alignment are essential. After installation, adjust pinion and spur mesh as required to achieve optimal quiet running and minimal backlash.

Can this help reduce drivetrain noise?

A correctly fitted and undamaged housing supports proper mesh, which can reduce noise caused by misalignment. However, noise is also influenced by gear condition and bearing health.

Any checks before first run after fitting?

Rotate the drivetrain by hand to confirm smooth movement, recheck gear mesh and bearing sit, and tighten fasteners to spec before applying power for a test run.

Copyright © 2008-2026 rcjaz.com.au All rights reserved