YZ-4S / B-YZ4SF Adjustable Graphite Centre Link for Ackermann Tuning - S4-201CLA by Yokomo  [S4-201CLA]

Yokomo S4-201CLA Graphite Center Link for YZ-4S
Price:
AUD$13.92
Brand:
Yokomo
Model:
S4-201CLA
GTIN:
0639342188062
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - YZ-4 category
Write a review

Graphite centre link tailored to YZ-4S

This graphite centre link is intended for 1/10 scale YZ-4S touring car use as an RC suspension tuning piece, not for any road vehicle. It supplies three selectable tie rod mounting holes so you can alter Ackermann without replacing steering blocks or uprights.

Fitting the link means removing the original centre link and refitting with the current steering linkage fasteners; always check for full steering travel clearance at each pivot before final tightening. Because the material is graphite, avoid overtightening bolts which can create stress risers in the part.

Practical tuning notes: inner pivot positions tend to increase inner wheel steering for a sharper turn-in feel, while outer positions cut inner wheel angle to aid stability on corner exit. Any changes should be reviewed in conjunction with toe and servo travel to preserve consistent steering behavior.

Compatible Models

  • YZ-4S
  • B-YZ4SF
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which pivot gives the quickest turn-in?

The innermost pivot produces the fastest turn-in by increasing inside wheel angle. Use small increments and test on track to avoid oversteer from too much inside angle.

Do I need different steering blocks or uprights?

No, the center link is designed to work with your existing steering blocks and uprights. Pivot changes adjust geometry without requiring other steering component swaps.

What torque should I use on the fasteners?

Use moderate torque values appropriate for graphite and the supplied hardware; tighten gradually and avoid sudden high torque to prevent cracking. Verify tightness after initial runs.

Copyright © 2008-2026 rcjaz.com.au All rights reserved