ZS-010TPA Universal Joint Pin (1.5mm) for ZS-010FT by Yokomo  [ZS-010TPA]

Yokomo ZS-010TPA Universal Shaft Joint/Pin (1.5mm pin) for ZS-010FT
Price:
AUD$4.44
Brand:
Yokomo
Model:
ZS-010TPA
GTIN:
0639342199556
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP-AE86A category
Write a review

Low-friction universal shaft service pin

This Yokomo ZS-010TPA replacement is an RC-scale universal shaft joint pin designed for maintenance and low-friction rotation of the universal shaft assembly. The part is supplied as a 1.5mm pin intended to restore smooth coupling where the original pin shows wear, and to reduce binding in the driveline during light-duty runs and setup checks.

Fit and role: the pin is a service item used to retain the low-friction joint on the universal shaft, helping to maintain predictable drivetrain behaviour after routine teardown and cleaning. It is suited to hobby-scale RC models that use the ZS-010FT joint form factor and related DP-series mounting arrangements listed below.

Supported chassis: DP-DP7C / DP-DP8 / DP-GR35 / DP-UF86A / DP-M786A / DP-HKS86A / DP-MKXA / DP-C33A / DP-SC430A / DP-TY180A / DP-JZX2A / DP-BNAA / DP-SDA / DP-EVXA / DP-DKPA / DP-BS15A / DP-REA7A / DP-DM13A / DP-ZCRA / DP-TYS15A / DP-BL34DA / DP-PS13A / DP-JZZ30A / DP-DR86A / DP-REAA / DP-ORCZ33A / DP-JZXA / DP-HKSA / DP-180SXA / DP-FC3SA / DP-S15A / DP-AE86A / MRTC-SD9 / MRTC-86.

Installation notes: the pin replaces the worn shaft pin in the universal joint, so basic disassembly of the joint is required. Use correct 1.5mm alignment when seating the pin, check free rotation after reassembly, and verify clearance at the joint during slow inspections to avoid binding.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What is the exact pin measurement for this part?

The supplied pin is 1.5mm in diameter, matching the ZS-010FT universal joint requirement.

Can replacing the pin influence tuning or feel?

While primarily a maintenance item, a snug pin can reduce unwanted slop and lead to a crisper rotation feel, which may be perceptible during setup runs.

Any tips for seating the pin correctly?

Align the joint with a 1.5mm guide, press the pin straight through, then rotate the joint by hand to check for free movement and correct clearance.

Copyright © 2008-2026 rcjaz.com.au All rights reserved